Leather connection tape

Leather connection tape, high temperature resistant connection adhesive

product manual

The tape uses polyester-PET or PI as the base material, the surface of the base material is specially treated, and the single-sided coated high temperature resistant special joint

Barrier adhesive, high coating accuracy, no wire drawing, scratches, discoloration, air bubbles and other phenomena; with high temperature resistance, good resistance to chemical solvents, high adhesion, soft clothing and other characteristics!

High temperature connection tape composition:

50, 75um fluoroplastic material (transparent)

Adhesive 40-50um (High temperature resistant special connection adhesive)

25umPET or PI film (specially treated surface)

High temperature connection tape classification: PET connection tape release paper connection tape leather release paper connection tape green connection tape, red connection tape, brown connection tape blue connection tape PET high temperature connection tape

Transparent double-sided pet tape Yellow glassine PET tape PET double-sided tape
Huang Grassin PET tape is made of PET film as the substrate and coated with special pressure-sensitive adhesive on one side or both sides.
PET single-sided tape: thickness: 0.05T/0.08T/0.1T/0.12T/0.14T/0.18T;
White paper and white PET double-sided adhesive; White glassine double-sided adhesive yellow glassine PET double-sided adhesive.
The temperature resistance of pet tape is usually between 120 degrees and 260 degrees. It is commonly used in painting, baking leather processing, coating masking and fixing in the process of electronic parts, printing circuit boards and high temperature processing masking. The tape is mainly identified from the following points: 1. Taste; 2. Appearance; 3. Residue after ignition and combustion; 4. Actual high temperature test, over 260 degrees high temperature, check for residual glue, shrinkage and other phenomena. Application of adhesive tape:
1. Excellent resistance to warping on curved surfaces and concave and convex surfaces; Du Te Yi
2. It can play a good bonding effect on the metal paint surface, polyester foam and plastic parts;
3. Двусторонняя лента из ПЭТ, покрытая с обеих сторон самоклеящимся клеем, толщина продукта: 0,12-0,15 мм; толщина разделительной бумаги: 0,13 мм, имеет отличную начальную и конечную липкость, высокую прочность склеивания;
4. Хорошие характеристики сдвига и штамповки;
5. Адаптация к окружающей среде в диапазоне -40 ℃ ~ 150 ℃, может работать при температуре 70 ℃ в течение длительного времени.