3M Double Coated Polyethylene Foam Tape
Min Order Quantity: 1000 Square Meters
Aftësia e furnizimit: 15000 metra katrorë
Porti: Shenzhen, China
Kushtet e Pagesës: T / T, L / C, Paypal, Western Union
Koha e Dorëzimit: Rreth 10-15 ditë
3M Double Coated Polyethylene Foam Tape
3M Double Coated Polyethylene Foam Tapes 4492G, 4492W, 4492B, 4496W and 4496B combine a conformable closed-cell foam with a high strength acrylic adhesive that provides good initial tack and offers high ultimate adhesion to a wide variety of surfaces.
Karakteristikat:
- Black or white, 0.031 in. (0.8 mm) closed-cell polyethylene foam carrier.
- High ultimate adhesion to a wide variety of surfaces.
- Lidh shirita të konformueshëm në sipërfaqe të parregullta.
- Sistemi unik i ngjitësit të gomës siguron ngjitje të shpejtë.
- Ngjitet mirë në shumicën e materialeve me energji të ulët sipërfaqësore (LSE)
Detajet e Paketimit:
Eksportoni paketimin standard për shiritin e shkumëzuar polietileni të dyfishtë. (Nëse klientët kanë kërkesa të veçanta, ne gjithashtu mund të bëjmë në përputhje me rrethanat.)
Avantazhet tona konkurruese të fabrikës:
- Çmime konkurruese dhe kontroll i lartë i cilësisë
- Dorëzimi i shpejtë
- Produkte miqësore me tokën
- Në një larmi modeli
- Renditja e Vogël e pranueshme
- OEM pranuar
Shënim: Të gjitha të dhënat që përmbahen në këtë bazë të dokumentit mbi metodën e provës standarde të Kinës, ato janë vlera mesatare, ato nuk duhet të përdoren për një qëllim specifik. Të gjitha deklaratat, informacioni teknik dhe rekomandimet e përfshira bazohen në teste që ne besojmë se janë të besueshme, por ne fuqimisht rekomandojmë që klientët të bëjnë testet e tyre dhe të vendosin nëse produkti është i përshtatshëm për një qëllim të veçantë ose mënyrën e aplikimit.
Këto veti të produktit janë sugjeruese dhe të gjitha produktet mund të personalizohen ose konvertohen për t'iu përshtatur kërkesave specifike të aplikimit. Ju lutemi na kontaktoni për të diskutuar nevojat tuaja unike të aplikimit.
- Signs, Nameplates and Plaques.
- Point of Purchase and other Displays.
- Plastic Hooks, Racks and Dispensers.
- Wire and Cable Clips – meets UL Spec QOQW2.MH17478.
- Appliance, Display Case and Electronic Equipment Trim.
Typical Physical Properties:
Typical Physical Properties and Performance Characteristics | Tapes 4462W / 4462B | Tapes 4466W / 4466B | Tapes 4492W / 4492B | Tapes 4496W / 4496B | |
Peel Adhesion: To Stainless Steel Room Temperature 90° Angle Peel 12in./min. Jaw Speed (308mm/min.) 72-hour Dwell ASTM D-3330 | 8lb./in. width (140N/100mm) | 8lb./in. width (140N/100mm) | 8lb./in. width (140N/100mm) | 8lb./in. width (140N/100mm) | |
Static Shear: 1/2in.²(3.23cm²) overlap will hold for ASTM D-3654 | 72°F(22°C) | 1000g | 1000g | 1000g | 1000g |
120°F(49°C) | 250g | 250g | 500g | 500g listed weight | |
158°F(70°C) | - | - | 250g | 250g 10,000 min. | |
Normal Tensile: (T-Block) 1 in.²(6.45cm²) Jaw Speed 2 in./min. (50mm/min.) 72 hour Dwell ASTM D-897 | 60lb./in.² (415kPa) | 40lb./in.² (275kPa) | 60lb./in.² (415kPa) | 40lb./in.² (415kPa) | |
Dynamic Shear: 1 in.² (6.45cm²) overlap Jaw Speed 0.5 in./min. (12.7mm/min.) ASTM D-1002 | 55lb./in.² (380kPa) | 35lb./in.² (240kPa) | 55lb./in.² (380kPa) | 35lb./in.² (240kPa) | |
Temperature Resistance | Short Term (Minutes, Hours) | 158°F (70°C) | 180°F (82°C) | ||
Long Term (Days, Weeks) | 120°F (49°C) | 158°F (70°C) | |||
U.V. Resistance | Not recommended for direct exposure to U.V. light. | No apparent degradation when exposed for seven days in U.V. chamber. | |||
Solvent Resistance: Splash testing cycle-20 seconds submersion, 20 sec. air dry, 3cycles | No apparent degradation when exposed to splash testing of typical hydrocarbon solvents. |
Construction:
Construction | Tapes 4462W / 4462B | Tapes 4466W / 4466B | Tapes 4492W / 4492B | Tapes 4496W / 4496B | |
Adhesive Type | 745 (Rubber Adhesive) | 430 (Acrylic Adhesive) | |||
Adhesive Carrier | Closed Cell Crosslinked Polyethylene Foam | Closed Cell Crosslinked Polyethylene Foam | |||
Thickness | Nominal | 1/32in. 0.031in. (0.8mm) | 1/16in. 0.062in. (1.6mm) | 1/32in. 0.031in. (0.8mm) | 1/16in. 0.062in. (1.6mm) |
Tolerance | 0.025-0.045in. (0.6-1.0mm) | 0.053-0.080in. (1.4-2.0mm) | 0.025-0.045in. (0.6-1.0mm) | 0.053-0.080in. (1.4-2.0mm) | |
Foam Color | White(W) / Black(B) | White(W) / Black(B) | White(W / Black(B) / Grey(G) | White(W) / Black(B) | |
Release Liner | 0.003in. White Paper (0.08mm) | 0.003in. Tan Paper (0.08mm) | |||
Approximate Density (foam only) | 6 lb./ft.³ (95kg/m³) | 4 lb./ft.³ (65kg/m³) | 6 lb./ft.³ (95kg/m³) | 4 lb./ft.³ (65kg/m³) |