Warmtegeleidende gomband vir LED-strook

Min Order Quantity: 1000 Square Meters
Voorsieningsvermoë: 15000 vierkante meter
Poort: Shenzhen, China
Betalingsvoorwaardes: T / T, L / C, Paypal, Western Union
Levertyd: Ongeveer 10-15 dae

Stuur navraag

Warmtegeleidende gomband vir LED-strook

Warmtegeleidende gom is gemaak van 'n gevorderde hittegeleidende drukgevoelige kleefmiddel. Die Xinst-P80XXN-reeks bied 'n beter manier vir toepassings wat goeie kleefsterkte en superieure termiese geleidingsdoeltreffendheid benodig. Die Xinst-P80XXN-reeks is toepaslik op elektroniese meganiese komponente soos die koellichamemodule en die LED-ligbalkmodule om 'n beter hitte-oordragpad tussen hittegenererende komponente en koelbakkies of ander verkoelingstoestelle te bied.

Kenmerke:

Volledige dikte standaard is beskikbaar.
Verskeie strukture is vir verskillende toepassings.
Stabiel en ekonomies.
Uitstekende hechtsterkte en termiese geleidingsdoeltreffendheid.

Thermally Conductive Glue Tape For LED Strip

Verpakking Besonderhede:

Export standard packing for Thermally Conductive Glue Tape For LED Strip. (If customers have special requirements, we also can make accordingly.)

Ons mededingende voordele in die fabriek:

Goed mededingende pryse en hoë gehaltebeheer
Vinnige aflewering
Aardvriendelike produkte
In 'n verskeidenheid ontwerp
Klein bestelling aanvaarbaar
OEM aanvaar

Opmerking: alle gegewens wat in hierdie dokument vervat is, berus op die standaardmetode van China, dit is gemiddelde waardes en moet nie vir 'n spesifieke doel gebruik word nie. Alle verklarings, tegniese inligting en aanbevelings is gebaseer op toetse wat ons glo betroubaar is, maar ons beveel sterk aan dat kliënte hul eie toetse moet doen en moet besluit of die produk geskik is vir 'n spesifieke doel of vir die toepassing.

Hierdie produk-eienskappe is suggestief en alle produkte kan aangepas of omgeskakel word om aan spesifieke toepassingsvereistes te voldoen. Kontak ons asseblief om u unieke toepassingsbehoeftes te bespreek.

Assembly of the heat sink and DDR-RAM module.
Assembly of the LED light bar module and metal frame bezel.
Die-cut piece and Laminate.
Applied to the chip, flexible circuit boards and high-power transistors and heat sinks or other cooling device bonding.

Products No.	P8010N	P8015N	P8020N	P8025N	P8030N	P8040N
Carrier Type	No	No	No	No	No	No
Blue Film	0.08mm
Roll Length Standard Maximum	50M	50M	25M/50M	25M/50M	25M	25M
Roll Width	1030mm
Kleefdikte	0.1mm	0.15mm	0.2mm	0.25mm	0.3mm	0.4mm
Tape Total Thickness Tolerance	0.1mm±10%	0.15mm±10%	0.2mm±10%	0.25mm±10%	0.3mm±10%	0.4mm±10%
180 Peel Adhesion (PSTC-101) (N/25mm)	>12.5	>14.2	>15.6	>17.5	>18.2	>18.5
Temperature Tolerance Long Term °C(°F) Short Term °C(°F)	120 (248) 180 (356)	120 (248) 180 (356)	120 (248) 180 (356)	120 (248) 180 (356)	120 (248) 180 (356)	120 (248) 180 (356)
Holding Power (PSTC-7) (Hr) (1kg/inch/25°C)	>48	>48	>48	>48	>48	>48
Adhesion (kg/inch)	1.1	1.4	1.4	1.4	1.4	1.5
Voltage Resistance (kV)	2	2.5	3.5	4.1	5	6
Initial Tack (kg/inch)	＞0.6	＞1.3	＞1.3	＞1.3	＞1.3	＞1.3
Thermal Conductivit ASTM D22470 (W/m-k)	1.2
Temperature Range of Usage	-20°C～+120°C
Berging en rakleeftyd	Store in original cartons at 23℃±5℃ and 60%±10% relative humidity in order to obtain best performance, besides use these products within 15 months from date of manufacture

Storage and Shelf Life:

Store in original cartons at 23 ±5°C and 60%±10% relative humidity in order to obtain the best performance, besides using these products within 18 months from the date of manufacture.

Important Notice:

This document is the property of XST tape. Please consult with us before using it.
This document for any purpose other than that for which it was intended.
The data provided herein are measurement only and are not guaranteed. Please make sure the product is capable of the application before actually tempting to put it to use.
Users assume all risk and liability associated with such use.

STUUR E-POS NA ONS