+86 137 6041 5417 እ.ኤ.አ.
በትእዛዝ ይደውሉ
+86 137 6041 5417 እ.ኤ.አ.
ምድቦች
ይመክራሉ
ሮጀርስ ቢስኮ ኤችቲ -1240 ኤችቲ -1250 ኤችቲ -1260 ኤችቲ -1270 ኤችቲ -1500
Min Order Quantity: 1000 Square Meters
አቅርቦት ችሎታ: 15000 ካሬ ሜትር ወደብ-henንዘን
፣ የቻይና
የክፍያ ውሎች-ቲ / ቲ ፣ ኤል / ሲ ፣ Paypal ፣ ዌስተርን ዩኒየን
የመላኪያ ጊዜ-ከ10-15 ቀናት ያህል
ሮጀርስ ቢስኮ ኤችቲ -1240 ኤችቲ -1250 ኤችቲ -1260 ኤችቲ -1270 ኤችቲ -1500
የቢስሶ ጠንካራ የሲሊኮን ቁሳቁሶች ለከፍተኛ ሙቀት / ከፍተኛ ግፊት ለጋዝ ማስወጫ መተግበሪያዎች የተሰሩ ናቸው ፡፡ የተለያዩ የደንበኞችን ፍላጎቶች እና ፍላጎቶች ለማሟላት በበርካታ ውፍረት እና በበርሜተሮች ውስጥ ይገኛሉ ፡፡ ለተጨማሪ ልኬት መረጋጋት እና እንባ ጥንካሬን በመጨመር ደረጃዎች በፋይበር ግላስ ማጠናከሪያም ይገኛሉ ፡፡
Our General Purpose Silicone Rubbers are firmer in nature and offer resistance to high temperatures, tear, and most fluids for general industrial type applications.
የማሸጊያ ዝርዝሮች
Export standard packing for Rogers BISCO HT-1240 HT-1250 HT-1260 HT-1270 HT-1500. (If customers have special requirements, we also can make accordingly.)
የእኛ ፋብሪካ ተወዳዳሪ ጥቅሞች
- ደህና ውድድር ዋጋዎች እና ከፍተኛ ጥራት ቁጥጥር
- ፈጣን አቅርቦት
- ለምድር ተስማሚ ምርቶች
- በልዩ ልዩ ዲዛይን ውስጥ
- አነስተኛ ትዕዛዝ ተቀባይነት አለው
- የኦሪጂናል ዕቃ እቃ ተቀባይነት አግኝቷል
ማስታወሻ በቻይና መደበኛ የሙከራ ዘዴ ላይ በዚህ ሰነድ መሠረት የተያዙ ሁሉም መረጃዎች እነሱ አማካይ እሴቶች ናቸው ፣ ለተወሰነ ዓላማ ጥቅም ላይ መዋል የለባቸውም ፡ ሁሉም መግለጫዎች ፣ ቴክኒካዊ መረጃዎች እና የውሳኔ ሃሳቦች በአስተማማኝ ናቸው ብለን ባመንናቸው ፈተናዎች ላይ የተመሰረቱ ናቸው ፣ ግን ደንበኞች የራሳቸውን ምርመራዎች እንዲያደርጉ እና ምርቱ ለተለየ ዓላማ ተስማሚ መሆን አለመሆኑን እንዲወስኑ በጥብቅ እንመክራለን ፡፡
እነዚህ የምርት ባህሪዎች ጠቋሚ ናቸው እናም ሁሉም ምርቶች ከተለዩ የመተግበሪያ መስፈርቶች ጋር እንዲስማሙ ሊበጁ ወይም ሊቀየሩ ይችላሉ። የእርስዎን ልዩ የማመልከቻ ፍላጎቶች ለመወያየት እባክዎ እኛን ያነጋግሩን።
| Typical Physical Properties | Test Method | HT-1240 | HT-1250 | HT-1260 | HT-1270 | HT-1500 | |
| Durometer, Shore "A" (pts) | ASTM D-2240 | 40±5 | 50±5 | 60±5 | 70±5 | 75±10 | |
| Tensile Strength, psi (MPa) | ASTM D-412 | 825 (5.7) | 950 (6.6) | 1050 (7.2) | 1150 (7.9) | 300 (5.3) | |
| Elongation, % | ASTM D-412 | 350 | 300 | 250 | 200 | N/A | |
| Tear Strength, ppi (kN/m) | ASTM D-624 | 50 (8.8) | 70 (12.2) | 75 (13.1) | 90 (15.8) | N/A | |
| Compression Set, % 70hr @ 302°F (150°C) | ASTM D-395 (B) | 20 | 20 | 20 | 25 | 25 | |
| Effect of Dry Heat Aging 70hr @ 437°F (225°C) | Change in Hardness, Shore "A" (pts) | ASTM D-573 | ±5 | ±5 | ±5 | ±5 | -5 to +10 |
| Change in Tensile Strength, % | ASTM D-573 | -15 | -15 | -15 | -15 | -20 | |
| Change in Elongation, % | ASTM D-573 | -35 | -35 | -35 | -35 | N/A | |
| Effect of Oil Immersion ASTM #1 Oil 70hr @ 302°F (150°C) | Change in Hardness, Shore "A" (pts) | ASTM D-471 | -10 to +5 | -10 to +5 | -10 to +5 | -10 to +5 | -10 to +5 |
| Change in Tensile Strength, % | ASTM D-471 | -10 | -10 | -10 | -10 | -20 | |
| Change in Elongation, % | ASTM D-471 | -15 | -15 | -15 | -15 | N/A | |
| Change in Volume, % | ASTM D-471 | +5 | +5 | +5 | +5 | +10 | |
| Electrical & Thermal Properties | Dielectric Constant | ASTM D-150 | 3.0 | 3.0 | 3.1 | 3.2 | 3.2 |
| Dielectric Strength, Volts/mil | ASTM D-149 | 400 | 400 | 400 | 400 | 400 | |
| Volume Resistivity, Ohm-cm | ASTM D-257 | 1014 | 1014 | 1014 | 1014 | 1014 | |
| Thermal Conductivity, BTU in/hr/ft²/°F (W/m °K) | ASTM D-518 | 1.7 (0.25) | 1.8 (0.26) | 1.9 (0.27) | 2.1 (0.30) | 2.0 (0.29) | |
| Environmental Resistance | Volume Change from Water Immersion %, 70hr. @ 212°F (100°C) | ASTM D-471 | +10 | +5 | +5 | +5 | +5 |
| Low Temperature Embrittlement, °F (°C) | ASTM D-2137 | -80 (-62) | -80 (-62) | -80 (-62) | -80 (-62) | -80 (-62) | |
| Recommended Use Temperature, °F(°C) | -80 to 425 (-62 to 218) | -80 to 425 (-62 to 218) | -80 to 425 (-62 to 218) | -80 to 425 (-62 to 218) | -80 to 425 (-62 to 218) | ||
| Dimensions | Available Thickness Range, inches (mm) | 0.020 to 0.125 (0.5 to 3.2) | 0.020 to 0.125 (0.5 to 3.2) | 0.020 to 0.125 (0.5 to 3.2) | 0.020 to 0.125 (0.5 to 3.2) | 0.031 to 0.125 (0.8 to 3.2) | |
| Standard Widths, inches (mm) | 36 (914) | 36 (914) | 36 (914) | 36 (914) | 36 (914) | ||
| Standard Colors | Red | Red | Red | Red | Red | ||
| Spcifications Available | A-A-59588 | 40 | 50 | 60 | 70 | N/A | |
| AMS Specification | N/A | 3302 | 3303 | 3304 | 3320 |
ለእኛ ኢሜይል ይላኩ
