+86 137 6041 5417 sales@szxinst.com
search button

Rogers BISCO HT-1240 HT-1250 HT-1260 HT-1270 HT-1500

Min Order Quantity: 1000 Square Meters
Supply Ability: 15000 Square Meters
Port: Shenzhen, China
Payment Terms: T/T, L/C, Paypal, Western Union
Delivery Time: About 10-15 days

BISCO Solid Silicone materials are designed for high temperature/high-pressure gasketing applications. They are available in a range of thicknesses and durometers to meet a variety of customer needs and requirements. Grades are also available with fiberglass reinforcement for added dimensional stability and with increased tear strength.

Our General Purpose Silicone Rubbers are firmer in nature and offer resistance to high temperatures, tear, and most fluids for general industrial type applications.

Packaging Details:

Export standard packing for Rogers BISCO HT-1240 HT-1250 HT-1260 HT-1270 HT-1500. (If customers have special requirements, we also can make accordingly.)

Our Factory Competitive Advantages:

  • Well Competitive Prices and High Quality Control
  • Prompt Delivery
  • Earth-friendly Products
  • In a Variety of Design
  • Small Order Acceptable
  • OEM Accepted

Note: All data contained in this document base on china standard test method, they are average values, they should not be used for a specific purpose. All statements, technical information, and recommendations contained are base upon tests that we believe are reliable, but we strongly recommend clients should do their own tests and decide whether the product is fit for a particular purpose or the method of application.

These product properties are suggestive and all products can be customized or converted to fit specific application requirements. Please contact us to discuss your unique application needs.

Typical Physical Properties Test Method HT-1240 HT-1250 HT-1260 HT-1270 HT-1500
Durometer, Shore “A” (pts) ASTM D-2240 40±5 50±5 60±5 70±5 75±10
Tensile Strength, psi (MPa) ASTM D-412 825 (5.7) 950 (6.6) 1050 (7.2) 1150 (7.9) 300 (5.3)
Elongation, % ASTM D-412 350 300 250 200 N/A
Tear Strength, ppi (kN/m) ASTM D-624 50 (8.8) 70 (12.2) 75 (13.1) 90 (15.8) N/A
Compression Set, % 70hr @ 302°F (150°C) ASTM D-395 (B) 20 20 20 25 25
Effect of Dry Heat Aging 70hr @ 437°F (225°C) Change in Hardness, Shore “A” (pts) ASTM D-573 ±5 ±5 ±5 ±5 -5 to +10
Change in Tensile Strength, % ASTM D-573 -15 -15 -15 -15 -20
Change in Elongation, % ASTM D-573 -35 -35 -35 -35 N/A
Effect of Oil Immersion ASTM #1 Oil 70hr @ 302°F (150°C) Change in Hardness, Shore “A” (pts) ASTM D-471 -10 to +5 -10 to +5 -10 to +5 -10 to +5 -10 to +5
Change in Tensile Strength, % ASTM D-471 -10 -10 -10 -10 -20
Change in Elongation, % ASTM D-471 -15 -15 -15 -15 N/A
Change in Volume, % ASTM D-471 +5 +5 +5 +5 +10
Electrical & Thermal Properties Dielectric Constant ASTM D-150 3.0 3.0 3.1 3.2 3.2
Dielectric Strength, Volts/mil ASTM D-149 400 400 400 400 400
Volume Resistivity, Ohm-cm ASTM D-257 1014 1014 1014 1014 1014
Thermal Conductivity, BTU in/hr/ft²/°F (W/m °K) ASTM D-518 1.7 (0.25) 1.8 (0.26) 1.9 (0.27) 2.1 (0.30) 2.0 (0.29)
Environmental Resistance Volume Change from Water Immersion %, 70hr. @ 212°F (100°C) ASTM D-471 +10 +5 +5 +5 +5
Low Temperature Embrittlement, °F (°C) ASTM D-2137 -80 (-62) -80 (-62) -80 (-62) -80 (-62) -80 (-62)
Recommended Use Temperature, °F(°C) -80 to 425 (-62 to 218) -80 to 425 (-62 to 218) -80 to 425 (-62 to 218) -80 to 425 (-62 to 218) -80 to 425 (-62 to 218)
Dimensions Available Thickness Range, inches (mm) 0.020 to 0.125 (0.5 to 3.2) 0.020 to 0.125 (0.5 to 3.2) 0.020 to 0.125 (0.5 to 3.2) 0.020 to 0.125 (0.5 to 3.2) 0.031 to 0.125 (0.8 to 3.2)
Standard Widths, inches (mm) 36 (914) 36 (914) 36 (914) 36 (914) 36 (914)
Standard Colors Red Red Red Red Red
Spcifications Available A-A-59588 40 50 60 70 N/A
AMS Specification N/A 3302 3303 3304 3320

SEND EMAIL TO US

    email Contact
    go top