+86 137 6041 5417 sales@szxinst.com
search button
call on order +86 137 6041 5417

Shockproof Sponge PORON Foam Tape Sheet

Features:
• Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required.
• Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices.

Shockproof Sponge PORON Foam Tape Sheet Descriptions:

PORON is a fine pitch open cell urethane foam produced by Rogers Corporation.The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns.

PORON cellular urethane foam was engineered to have excellent memory (compression set resistance). The compression set resistance of PORON makes it a top pick for sealing and cushioning electronics.

PORON urethane foam is manufactured by continuously casting and curing mechanically mixed formulas to the desired thickness.

PORON foam tape is using PORON foam as backing material and coated with one side or two sided different kinds of adhesives.

.

Features:

• Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required.
• Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices.
• Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications.
• Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface.
• Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies.
• Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side.

.

OEM Size: Special length, thickness or combinations can be supplied per customer's request. Products can be supplied in roll, tape, sheets or shapes per customer's request. Only you provide the CAD drawing, we can die cut any size for you.

Shelf Life: To obtain best performance, use this product within 12 months from date of delivery and store under normal conditions of 60 ºC to 80ºF (16 ºC to 27ºC) and 40 to 60% R.H. in the original carton.

Our Factory Competitive Advantages:
• Well Competitive Prices and High Quality Control
• Prompt Delivery
• Earth-friendly Products
• In a Variety of Design
• Small Order Acceptable
• OEM Accepted

Friendly Tips:

If you find our tapes interested, please send your detailed requirements to us. Xinst’s team would offer different solutions to you within 12 hours. Free samples are also available.

If the pet insulation transformer mylar tape caters to your requirement, please be free to buy the quality products made in China with our professional manufacturers and suppliers in China. We’re equipped with a productive factory at your service.

Applications:
• Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications.
• For Sealing, Gasketing, and Cushioning.

INOAC ROGERS
Extra Soft Slow Rebound Soft Slow Rebound
Item Typical roll size Thickness Item Typical roll size Thickness
SRS-70P 500mm*100M 0.2mm
SRS-48P 500mm*100M 0.3mm 4790-92-30012-04P 1372mm*182.88M 0.3mm
SRS-40P 500mm*100M 0.4mm
SRS-40P 500mm*100M 0.5mm 4790-92-25021-04P 1372mm*144.78M 0.53mm
SRS-40P 500mm*50M 0.6mm 4790-92-25024-04P 1372mm*144.78M 0.61mm
SRS-40P 500mm*50M 0.7mm 4790-92-12030-04P 1372mm*121.92M 0.75mm
SRS-40P 500mm*50M 0.8mm 4790-92-25031-04P 1372mm*121.92M 0.79mm
SRS-40P 500mm*50M 1.0mm 4790-92-25041-04P 1372mm*106.68M 1.04mm
SRS-40P 500mm*50M 1.2mm 4790-92-12049-04P 1372mm*106.68M 1.25mm
SRS-32P 500mm*50M 1.5mm 4790-92-12059-04P 1372mm*91.44M 1.50mm
SRS-32P 500mm*50M 2.0mm 4790-92-20081-04P 1372mm*68.58M 2.06mm
SRS-24P 500mm*50M 2.5mm 4790-92-20093-04P 1372mm*68.60M 2.36mm
SRS-24P 500mm*50M 3.0mm 4790-92-15120-04P 1372mm*50.29M 3.05mm
Very Soft Rebound/ PET Supported Very Soft Rebound/ PET Supported
MS-32P 500mm*100M 0.5mm 4701-30-25021-04P 1372mm*144.78M 0.53mm
MS-32P 500mm*50M 0.7mm 4701-30-25031-04 1372mm*47.72M 0.79mm
MS-32P 500mm*50M 1.0mm 4701-30-25037-04P 1372mm*121.92M 0.94mm
ML-32 500mm*50M 1.5mm 4701-30-20062-04 1372mm*91.44M 1.57mm
ML-32 500mm*50M 2.0mm 4701-30-20093-04 1372mm*68.58M 2.36mm
ML-32 500mm*50M 3.0mm 4701-30-20125-04 1372mm*50.29M 3.18mm

SEND EMAIL TO US

    email Contact
    go top