+86 137 6041 5417 sales@szxinst.com
search button

Welches Band wird für die 3D-Druckisolierung verwendet?

xinst06. Februar 2020

Dinge, die blockiert werden müssen, wie Licht, Ton oder Wärme, haben einzigartige Eigenschaften.
New Steflon Bänder und Kapton - Bänder machen eine Vielzahl von Bereichen, Block Dinge, während die Vorteile ihrer Eigenschaften nehmen.

Xinst High Adhesive magical waterproof and leaking pipe repair tape

Aufgrund seines breiten Spektrums an Temperaturstabilität und elektrischen Isolationsfähigkeiten werden Kapton-Bänder üblicherweise als Isolations- und Schutzschichten für elektrostatisch empfindliche und zerbrechliche Komponenten in der Elektronikfertigung verwendet.
Da es die für Reflow-Lötvorgänge erforderliche Temperatur aufrechterhalten kann und sein Schutz während des gesamten Produktionsprozesses verwendet werden kann, sind im Endverbraucherprodukt häufig noch antistatische Kapton-Bänder vorhanden.

Kapton tape and ABS adhere well together, which has led to the widespread use of Kapton tape as a construction surface for 3D printers.
The Kapton tape is laid on a flat surface and the ABS is extruded onto the surface of the Kapton tape.
Printed ABS parts do not separate from the build platform as they cool and shrink, which is a common cause of printing failure

ESD Kapton tape is also commonly used to fix components such as thermocouples to the hot end of plastic extruders.
This helps prevent detached thermocouples, which can cause uncontrolled overheating of the nozzle, and fire.

 

Learn more about the properties of the print material you choose.
The two mainstream plastics used in personal 3D printing are ABS and PLA.
Each has its own characteristics, such as melting temperature and discharging speed.
Make sure the printer data you set up supports the printing material you are using.

Wenn Sie an unseren Produkten interessiert sind, abonnieren Sie bitte unsere E-Mail
email Kontakt
go top