+86 137 6041 5417 sales@szxinst.com
search button

3M Double Coated Polyethylene Foam Tape

Min Order Quantity: 1000 Square Meters
Lieferfähigkeit: 15000 Quadratmeter
Hafen: Shenzhen, China
Zahlungsbedingungen: T / T, L / C, Paypal, Western Union
Lieferzeit: ca. 10-15 Tage

3M Double Coated Polyethylene Foam Tape

3M doppelt beschichtete Polyethylenschaumbänder 4492G, 4492W, 4492B, 4496W und 4496B kombinieren einen anpassungsfähigen geschlossenzelligen Schaum mit einem hochfesten Acrylklebstoff, der eine gute Anfangshaftung bietet und eine hohe Endhaftung auf einer Vielzahl von Oberflächen bietet.

Eigenschaften:

  • Schwarz oder weiß, 0,8 mm (0,031 Zoll) geschlossenzelliger Polyethylenschaumträger.
  • High ultimate adhesion to a wide variety of surfaces.
  • Conformable tape bonds to irregular surfaces.
  • Unique rubber adhesive system provides quick stick.
  • Adheres well to most low surface energy (LSE) materials

Packaging Details:

Export standard packing for Double Coated Polyethylene Foam Tape. (If customers have special requirements, we also can make accordingly.)

Unsere Wettbewerbsvorteile im Werk:

  • Well Competitive Prices and High Quality Control
  • Prompt Delivery
  • Earth-friendly Products
  • In a Variety of Design
  • Small Order Acceptable
  • OEM Accepted

Note: All data contained in this document base on china standard test method, they are average values, they should not be used for a specific purpose. All statements, technical information, and recommendations contained are base upon tests that we believe are reliable, but we strongly recommend clients should do their own tests and decide whether the product is fit for a particular purpose or the method of application.

These product properties are suggestive and all products can be customized or converted to fit specific application requirements. Please contact us to discuss your unique application needs.

  • Signs, Nameplates and Plaques.
  • Point of Purchase and other Displays.
  • Plastic Hooks, Racks and Dispensers.
  • Wire and Cable Clips – meets UL Spec QOQW2.MH17478.
  • Appliance, Display Case and Electronic Equipment Trim.

Typical Physical Properties:

Typical Physical Properties and Performance Characteristics Tapes 4462W / 4462B Tapes 4466W / 4466B Tapes 4492W / 4492B Tapes 4496W / 4496B
Peel Adhesion: To Stainless Steel Room Temperature 90° Angle Peel 12in./min. Jaw Speed (308mm/min.) 72-hour Dwell ASTM D-3330 8lb./in. width (140N/100mm) 8lb./in. width (140N/100mm) 8lb./in. width (140N/100mm) 8lb./in. width (140N/100mm)
Static Shear: 1/2in.²(3.23cm²) overlap will hold for ASTM D-3654 72°F(22°C) 1000g 1000g 1000g 1000g
120°F(49°C) 250g 250g 500g 500g listed weight
158°F(70°C) - - 250g 250g 10,000 min.
Normal Tensile: (T-Block) 1 in.²(6.45cm²) Jaw Speed 2 in./min. (50mm/min.) 72 hour Dwell ASTM D-897 60lb./in.² (415kPa) 40lb./in.² (275kPa) 60lb./in.² (415kPa) 40lb./in.² (415kPa)
Dynamic Shear: 1 in.² (6.45cm²) overlap Jaw Speed 0.5 in./min. (12.7mm/min.) ASTM D-1002 55lb./in.² (380kPa) 35lb./in.² (240kPa) 55lb./in.² (380kPa) 35lb./in.² (240kPa)
Temperature Resistance Short Term (Minutes, Hours) 158°F (70°C) 180°F (82°C)
Long Term (Days, Weeks) 120°F (49°C) 158°F (70°C)
U.V. Resistance Not recommended for direct exposure to U.V. light. No apparent degradation when exposed for seven days in U.V. chamber.
Solvent Resistance: Splash testing cycle-20 seconds submersion, 20 sec. air dry, 3cycles No apparent degradation when exposed to splash testing of typical hydrocarbon solvents.

Construction:

Construction Tapes 4462W / 4462B Tapes 4466W / 4466B Tapes 4492W / 4492B Tapes 4496W / 4496B
Klebstofftyp 745 (Rubber Adhesive) 430 (Acrylic Adhesive)
Adhesive Carrier Closed Cell Crosslinked Polyethylene Foam Closed Cell Crosslinked Polyethylene Foam
Thickness Nominal 1/32in. 0.031in. (0.8mm) 1/16in. 0.062in. (1.6mm) 1/32in. 0.031in. (0.8mm) 1/16in. 0.062in. (1.6mm)
Tolerance 0.025-0.045in. (0.6-1.0mm) 0.053-0.080in. (1.4-2.0mm) 0.025-0.045in. (0.6-1.0mm) 0.053-0.080in. (1.4-2.0mm)
Foam Color White(W) / Black(B) White(W) / Black(B) White(W / Black(B) / Grey(G) White(W) / Black(B)
Release Liner 0.003in. White Paper (0.08mm) 0.003in. Tan Paper (0.08mm)
Approximate Density (foam only) 6 lb./ft.³ (95kg/m³) 4 lb./ft.³ (65kg/m³) 6 lb./ft.³ (95kg/m³) 4 lb./ft.³ (65kg/m³)

SENDEN SIE UNS EINE E-MAIL

    email Kontakt
    go top