3M double-sided adhesive industrial tape custom 3M9495LE double-sided adhesive high viscosity PET substrate tape can be die-cut
xinstJun 13, 2020
3M9495LE double-sided adhesive die cut is a PET double-sided adhesive, belonging to the 3M300LSE series of double-sided adhesive, made of transparent PET double-sided coated with acrylic acid adhesive, the color of the tape is transparent, the specification is: 1372MM*55M*0.17MMT, It has good dimensional stability, thermal stability, chemical stability, moisture resistance, good initial adhesion and good adhesion, easy die-cutting processing, and has good adhesion to plastics, rubber, and nameplates; it can be applied to a wider temperature range and Harsh environment; the release paper is polymer-coated moisture-proof kraft paper, which will not wrinkle under high humidity conditions; long-term temperature resistance of 93 ℃, short-term temperature resistance up to 149 ℃;
3M9495LE double-sided adhesive meets the requirements of ROHS regulations in terms of environmental protection. It is suitable for the bonding of nameplates, decorations, and decorative parts. Even if it is a painted surface, it has strong adhesion. Under the condition of 21℃ and 50% relative humidity, the storage period is 24 months from the date of production in the original packaging state.
3M9495LE die cut double-sided adhesive storage period:
Under 21°C and 50% relative humidity, the storage period in the original packaging state is 24 months from the date of production.
3M9495LE double-sided adhesive application technology:
The bonding strength increases with the increase of the area of contact between the adhesive and the surface to be adhered. The application of stable pressure helps the adhesive to contact the surface to be adhered, thereby increasing the adhesive strength.
To achieve the bonding effect of 3M9495LE double-sided adhesive, the bonding surface must be clean and dry. The temperature range of tape application is 21-38 ℃. It is recommended that if the initial bonding temperature is lower than 10 ℃, it is not suitable for bonding, so The adhesive at the time is too hard to be firmly bonded to the object; however, if it is already bonded, the holding force at low temperature is also satisfactory.
3M9495LE double-sided adhesive product application:
3M9495LE double-sided adhesive meets the requirements of ROHS regulations in terms of environmental protection. It is suitable for the bonding of nameplates, decorations and decorative parts, even painted surfaces, 3M tape, Hitachi (Hi-Bon) tape, Sony (SONY) tape, Nitto ( NITTO) tape, TESA tape, 3m self-adhesive label paper, INOAC PORON foam, domestic double-sided tape, double-sided adhesive tape for LED light bar, EVA foam products, Longhua PC film , Protective film, copper foil tape, aluminum foil tape, conductive cloth tape, silicone rubber products, insulation materials, electronic materials, packaging materials, etc.